![]() ![]() Holosun 509T: Slide will ship with the specific rail feature to mount the 509T directly with recoil stop slot. Skipping these steps will result in your optic not being tightened down sufficiently and/or operational issues from compressing the plunger rod with the screw. *For the Holosun EPS Carry, you must use their provided mounting plate and shorten the right-side mounting screw to avoid interfering with the plunger rod. For the Holosun optics, you will have to shorten the right-side optic mount screw as they are too long and will run into the plunger rod. Holosun 407K/507K/EPS Carry*/RMSc Shield: Slide will ship ready to mount those optics directly. This footprint is our default option for stocked slides so be sure to check our online store inventory before placing a special order with this option to avoid an unnecessary lead time. Please use the proprietary screws that Holosun provides with the optic. Holosun 407C/507C/508T: Slide will ship ready to mount those optics directly. Special shortened mounting screws will be provided to mount the optic and requires a T10 Torx Drive head to tighten. Suppressor height sights will provide a full co-witness instead of our usual lower 1/3 rd. Slide will ship ready to mount the Holosun SCS at a depth to lower 1/3 rd co-witness with factory height sights. Holosun SCS: This optic is very light and may require recoil spring adjustment for reliable operation. This footprint is not compatible with the Holosun 509T. The Steiner MPS can be used on this footprint but there will be a gap from the front of the footprint to the MPS. ![]() Please note that we will not re-cut an optic cut into the slide once it has been heat treated and hardened.Īimpoint Acro: Slide will ship with the specific rail feature to mount the Aimpoint Acro C-1, C-2, P-1, or P-2 optics directly to the slide with the included optic hardware. Sight mounting features will still be in the factory location. None: No optic cut will be milled onto the slide. Sealing plates or shrouds are still recommended for use by the optic manufacturer for intended applications. All mounting footprints do not require an adapter plate or sealing plate to mount the optic.Optic cut depths have been engineered to provide a lower 1/3rd co-witness with suppressor height sights.All mounting footprints are placed in front of the rear dovetail. ![]() The following is applicable for all mounting footprints unless stated otherwise: ![]() Using different optics on footprints than the ones specified below is at your own discretion and compatibility is not guaranteed. Please consider this choice carefully as this decision is not reversible once the slide has been milled to that specification. We machine the optic cut directly onto the slide without the need of an adapter plate. For additional information on each model click here to see their respective web pages. We offer a wide range of models that blend functional features into attractive, precision machined designs. This is where you choose the design that best meets your needs. This is the best way to get a stock slide reserved instead of waiting for a stock refresh that may not come. Pro Tip: Special orders that match a stock configuration will be fulfilled first before placing stock online. All our slides are machined from 17-4 Precipitation Hardened Stainless Steel solid billet right here in Las Vegas, NV. Craft your slide to meet your tactical needs! Our Special Order process allows you to configure the slide model, optic cut, and coating finish to complete your perfect firearm! Just make a few easy selections with our form and let us do the rest! Within the estimated lead time, we can create your perfect slide made to your custom specifications. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |